Description
| Specification | Detail |
|---|---|
| Manufacturer | Tyrant Designs |
| Model | T-Comp Magwell |
| Compatibility | Glock 17, 34, 45 Gen 5 |
| Material | 6061-T6 Aluminum, CNC machined |
| Finish | Type III Hard Anodized Black |
| Weight | 1.0 oz |
| Design | Low-profile competition flare |
| Installation | Replaces backstrap insert, drop-in |
Yes, you should buy the Tyrant Designs T-Comp Magwell for Glock Gen 5 if you want a no-fuss, functional upgrade. It’s a solid, affordable magwell that does its job without adding bulk or complexity. For $60, you get a precision-machined part that makes reloads faster and protects your frame. It’s a simple solution that works.
Who This Glock Gen 5 CNC Magwell Is For
USPSA/IDPA Shooters: You need every fraction of a second. The flared design guides magazines home under pressure, and the 1.0 oz weight won’t upset your gun’s balance.
EDC Users with a G45 or G17: You want a slight reload aid without a huge, snag-prone profile. The T-Comp’s low-profile design adds function without printing.
Builders Finishing a Custom Glock: You’ve dropped a new trigger in and want a clean, matching magwell to complete the look. The hard-anodized finish is durable and sharp.
Key Features of the Tyrant T-Comp Magwell
- CNC-Machined 6061-T6 Aluminum: This isn’t cast or molded plastic. It’s billet aluminum, so it’s tough, lightweight (1.0 oz), and has precise edges that actually guide mags.
- Drop-In Installation: You pull out your factory backstrap insert and drop this in. It uses the same pin. No gunsmithing, no permanent mods, and you can revert to stock in 60 seconds.
- Low-Profile Competition Flare: The angle is aggressive enough to funnel magazines effectively during speed reloads but trimmed enough for practical carry. It’s a smart balance.
- Type III Hard Anodized Finish: This is a military-spec finish. It resists holster wear, sweat, and abrasion far better than paint or cheap coating. It’ll match your slide.
- Frame Protection: The magwell acts as a bumper for your polymer frame. During aggressive reloads, the aluminum takes the impact, not your Glock’s lower.
Tyrant T-Comp vs. Other Glock Gen 5 Magwells
| Feature | Tyrant Designs T-Comp | SLR Rifleworks Magwell | Strike Industries Mass Driver |
|---|---|---|---|
| Price | $59.99 | $110+ | $45 |
| Material | 6061-T6 Aluminum | 7075-T6 Aluminum | Polymer |
| Installation | Drop-in (backstrap) | Drop-in (backstrap) | Clamp-on, requires set screws |
| Profile | Low-profile competition | Aggressive, high-volume | Bulky, extended |
| Best For | Value, balanced performance | Maximized competition funnel | Budget, less concern for profile |
Pros & Cons
Pros:
- Exceptional Value: You get CNC-machined aluminum and a professional finish for under $60. That’s hard to beat.
- True Drop-In Fit: It installs in literal seconds with no fitting, filing, or fuss. It just works.
- Smart, Functional Design: The flare is useful without being obnoxious. It improves reloads without making the gun harder to conceal.
Cons:
- Limited Compatibility: It only fits Gen 5 models (G17, G34, G45). If you have a Gen 3/4 or a different model, you’re out of luck.
- No Color Options (Currently): It only comes in black. If you want FDE, ODG, or a custom Cerakote, you’ll have to send it out yourself.
Frequently Asked Questions
Does this Tyrant magwell work with all Gen 5 Glocks?
No. It’s specifically designed for the full-size and compact-long slide Gen 5 frames: the Glock 17, 34, and 45. It will NOT fit the slimline models (G43X, G48) or the subcompacts (G26).
Will it fit with my aftermarket baseplates?
In most cases, yes. The low-profile flare is compatible with most common +0 or +2 basepads. If you run extremely large competition basepads, test fit is advised, but for typical magazine accessories, you’ll be fine.
Is the installation really that simple?
Yes. Punch out the rear pin that holds your backstrap, remove the plastic insert, drop the T-Comp in its place, and re-insert the pin. It’s a 60-second job with a punch and a small hammer.
How does the finish hold up?
The Type III Hard Anodizing is very durable. It’s far more resistant to holster wear and handling marks than standard anodizing or painted finishes. It’s designed for hard use.
Get Yours Today
Stop fumbling reloads. The Tyrant Designs T-Comp is a straightforward upgrade that delivers performance without the premium price. It’s built right here in the USA, it installs in a minute, and it makes a real difference on the clock or on the street.
✓ CNC Machined from Billet Aluminum
✓ Type III Hard Anodized Finish
✓ Simple Drop-In Installation
✓ Made in the USA
Add the Tyrant Designs T-Comp Magwell to your cart now and feel the difference on your next reload.
Reviews
There are no reviews yet.