Description
| Specification | Detail |
|---|---|
| Manufacturer | Strike Industries |
| Model | Mass Driver Comp |
| Compatibility | Glock 19 Gen 4 (model-specific fit) |
| Material | 7075-T6 Aluminum |
| Finish | Type III Hard Anodized Black |
| Weight | 1.3 oz (adds muzzle weight for recoil reduction) |
| Thread | No threaded barrel required — replaces recoil spring assembly |
| Installation | Replaces guide rod assembly, drop-in |
Yes, you should buy the Strike Industries Mass Driver Comp if you want a Glock 19 compensator without buying a threaded barrel. It’s a clever, drop-in solution that directly replaces your factory guide rod. You’ll get noticeable muzzle flip reduction for about eighty bucks and zero gunsmithing. For a simple Glock 19 compensator, it’s hard to beat the convenience.
Who It’s For
The Practical Shooter: You own a Gen 4 G19 and want to try a comp without the cost and hassle of a new barrel and thread protector. You value a simple install you can do at your bench.
The Competition Newcomer: You’re dipping your toes into USPSA Carry Optics or IDPA and need a legal, non-permanent mod to help with faster splits and sight tracking.
The “No-Mod” Enthusiast: You want to improve your pistol’s performance but refuse to permanently alter your slide or frame. This system is completely reversible.
Key Features & Benefits
- No Threaded Barrel Needed: The core benefit. It uses a proprietary guide rod and locking block system, saving you $150+ on a threaded barrel. It also eliminates the worry of a loose thread protector.
- Drop-In Installation: You field-strip your Glock, remove the factory guide rod, and install this unit. It takes two minutes. No fitting, no filing, no tools beyond a punch for the takedown lever.
- Dual-Action Recoil Reduction: The 1.3-ounce aluminum body adds forward mass to dampen muzzle rise, while the compensator ports redirect gas upward to fight flip. It’s a two-pronged attack on recoil.
- Gen 4 Specific Fit: It’s engineered for the dual-captured recoil spring assembly of the Gen 4. This ensures reliable lockup and function without the compatibility issues of a one-size-fits-all comp.
- Reversible Modification: Don’t like it? Going back to stock takes the same two minutes. Your OEM slide and barrel remain untouched, preserving the pistol’s original configuration and value.
How It Stacks Up: Strike Industries Mass Driver vs. The Competition
| Feature | Strike Industries Mass Driver | Standard Threaded Barrel + Comp | Slide-Mounted Comp (e.g., PMM) |
|---|---|---|---|
| Installation | Drop-in, no tools | Requires barrel swap, thread alignment | Requires slide milling & installation |
| Total Cost | ~$80 | $150 (barrel) + $80 (comp) = ~$230+ | $300+ (milling & comp) |
| Reversibility | Fully reversible in minutes | Reversible, but you own extra parts | Permanent slide modification |
| Primary Benefit | Extreme cost & installation simplicity | Maximum comp performance & barrel options | Most integrated, durable solution |
| Best For | Budget-first experimenters | Enthusiasts wanting top performance | Dedicated competition or duty guns |
Pros & Cons
Pros:
- Unmatched Value: For under $80, you get a functional comp system. It’s the cheapest entry point by a wide margin.
- Zero Commitment: The ultimate “try-before-you-buy-permanently” option for compensation. Swap it out before a match or range day.
- Gen 4 Reliability: When installed correctly, it runs with a wide range of 9mm ammunition, from 115gr to 124gr NATO, without tuning.
Cons:
- Bulkier Holster Fit: The added length and width at the muzzle may not fit all standard Kydex holsters. Plan on a custom or open-ended holster.
- Not the Ultimate Comp: While effective, a well-tuned comp on a threaded barrel will generally offer better recoil mitigation. This is the easy button, not the race gun solution.
Frequently Asked Questions
Does it work with all ammo, or do I need hot loads?
It’s designed to run with standard pressure 115gr and 124gr ammunition. You shouldn’t need “+P” loads to make it function. If you experience failures with very light target loads, you may need a lighter recoil spring, which you can find in our Glock Switches & Parts section.
Will this fit in my current Glock 19 holster?
Probably not. The comp adds about 0.8 inches in length and significant width. You’ll need an open-ended or specifically molded holster. For holsters and other carry Accessories, check our related categories.
Is it compatible with Glock 19 Gen 3 or Gen 5 models?
No. This model is specifically engineered for the Gen 4’s dual-captured recoil spring assembly. Using it on a Gen 3 or Gen 5 will not work correctly and could cause malfunctions or damage.
How does the recoil reduction compare to a traditional comp?
It’s about 60-70% as effective as a good single-port comp on a threaded barrel. The main benefit is reducing muzzle flip for faster follow-up shots. You’ll feel the difference, especially in rapid fire, but it won’t make your gun feel like a .22.
Final Verdict & Add to Cart
The Strike Industries Mass Driver Comp is the smart choice for the Glock 19 Gen 4 owner who’s comp-curious but not ready to invest in a full barrel-and-comp setup. It works, it’s simple, and it won’t break the bank. For $79.99, you’re buying a functional range toy that might just make you a faster shooter.
✓ In Stock & Ready to Ship
✓ 30-Day Return Policy
✓ Free Shipping on Orders Over $99
✓ Expert Support via Email
Reviews
There are no reviews yet.